Service Beide Service
Service Service

CE certification

Product introduction: 1. Introduction to CE certification'CE' mark is a safety certification mark, which is regarded as the passport opened by the manufacturer and entered the European market. CE stands for the logo of European unified CE certification (conform Europeenne). All products with 'CE' mark can be sold in EU member states without meeting the requirements of each member state, so as to realize the free circulation of goods within EU Member States.           In the EU market, 'CE' mark is a compulsory certification mark. Whether products produced by enterprises within the EU or products produced by other countries, if they want to circulate freely in the EU market, they must be affixed with 'CE' mark to show that the products meet the basic requirements of the EU Directive on new methods of technical coordination and standardization. This is a mandatory requirement for products under EU law.2. Which certification bodies are there for CE certification? CE certification body recommended!CE certification body recommends Beide technology!!!The full name of Bede technology is: Shenzhen Bede Technology Testing Co., Ltd., which was established in Shenzhen Special Economic Zone in July 2006. In 15 years, it has been ZTE, Feike and Han laser,Thousands of women's mobile phone testing stations, such as Raymond lighting, etcAt present, the company has a business site of more than 2500 square meters, including more than 1000 square meters of Technology Center laboratory and sample room, and more than 800 square meters of business department and customer service department of marketing center,The meeting room, reception area, reception room, manager's room and finance room of the management center cover an area of 700 square meters;The company has all kinds of talents, all inspectors work with certificates, have the qualification of import and export commodity inspection and quarantine, and have rich experience in testing and product evaluationProvide customers with one-stop global certification solutions. The experiment has advanced testing equipmentMore than 200 sets are prepared, all purchased from international brands such as Tektronix, Agilent and German R / s, and put into use after being calibrated by national recognized measurement institutions. The company's testing laboratory is inUnder the guidance of UL, Siemens, Rheinland and other authoritative certification bodies in the United States, according toEstablished according to ISO 17025 laboratory management system, it can provide customers with fair and satisfactory test data and provide customers with comprehensive and comprehensive one-stop service.3. Which products need CE certification and the benefits of CE certificationAll products exported to the EU market need CE certification. The difference lies in different directives, such as MD for mechanical products and EMC LVD for electronic products,Wireless products are red, general products are RoHS, and special products have special requirements and instructions. Therefore, for CE certification, it is recommended to consult professional machinesIt will greatly save your company's CE certification time, energy and expenses if you entrust professional people to do professional things.Applying for CE certification has many advantages: 1 The EU's laws, regulations and harmonized standards are not only numerous, but also complex in content, so they have won the support of the EUThe designated agency is a wise move that saves time, labor and reduces risks; 2. To maximize access to information from consumers and market surveillance agenciesLetter; 3. It can effectively prevent the occurrence of irresponsible accusations. Because the situation of each product is different, it is recommended to consult a professional organization to competeGet more preferential policies and benefits!4. How to apply for CE certification? Detailed process introductionThe way and process of handling CE certification for different products are the same. The detailed process is as follows:1. The manufacturer's relevant laboratory (hereinafter referred to as the laboratory) makes an oral or written preliminary application.2. The applicant fills in the CE marking application form and sends the application form, product instructions and technical documents to the laboratory (if necessary, the applicant company is also required to provide a prototype).3. The laboratory shall determine the inspection standards and inspection items and quote.4. The applicant confirms the quotation and sends the samples and relevant technical documents to the laboratory.5. The applicant shall provide technical documents.6. The laboratory sends a charge notice to the applicant, and the applicant pays the certification fee according to the charge notice.7. The Laboratory conducts product testing and reviews technical documents.8. Review of technical documents includes: A. whether the documents are perfect. B whether the document is written in the official language of the European Community (English, German or French).9. If the technical documents are incomplete or do not use the specified language, the laboratory will notify the applicant for improvement.10. If the test fails, the laboratory will notify the applicant in time and allow the applicant to improve the product. In this way, until the test is qualified. The applicant shall respond to the technology in the original applicationChange the data to reflect the actual situation after the change.5. What materials need to be prepared for CE certification? The details are as follows:a. Product instructions.b. Safety design documents (including key structure drawings, i.e. design drawings that can reflect the climbing distance, gap, number of insulation layers and thickness).c. Product technical conditions (or enterprise standards),d. Product electrical schematic diagram. e. Product circuit diagram. f. List of key components or raw materials (please select products with European certification mark).g. Copy of certification of complete machine or component. h. Other required information.Special note1. In order to shorten the certification cycle, the data provided should preferably be in the form of electronic documents.2. In the process of certification, for some special circumstances, the enterprise may need to submit other additional relevant materials.6. How much does CE certification cost? How long will it take?Cost ---- because CE certification belongs to product certification, the corresponding testing requirements, testing costs and testing cycles of different products are also completely different. At the same timeDifferent licensing requirements will also affect the cost. Therefore, if you want to know the clear CE certification fee, it is better to integrate it according to the specific products and specific requirements provided by your companyEvaluation is the only way to provide specific quotation!Cycle - 'it generally takes 15-20 working days to apply for CE certification. For general products, if your company's products are dangerous machinery products, medical devices, etcIt's a product with complex structure. The application time is longer. The details need to be determined after the comprehensive judgment of the engineer!7. Acceptance object and size of CE certification markThe acceptance object of CE certification mark is the national regulatory authority responsible for implementing market product safety control in EC member states, rather than customers. When a product has been attached with CE certification mark,The authorities responsible for sales Safety Supervision in Member States shall assume that they meet the main requirements of the directive and can circulate freely in the community market.The free circulation of goods is the cornerstone of establishing a single market. The mechanism to realize the free circulation of goods is the CE mark. This mechanism is established between EU countries to avoid new tradeBarriers, mutual recognition and coordination of technical standards. The principles are as follows:The contents stipulated in the harmonized legal documents of CE certification (i.e. EU directives) are limited to the basic requirements of products, so as to facilitate the free circulation of products within the EU;The EU harmonized standards contain the basic requirements of the directive;The application of EU harmonized standards and other standards is voluntary. Products can choose to apply EU harmonized standards or other technical specifications to meet the basic requirements specified in the directiverequirement; Products that meet the EU harmonized standards are certainly recognized as meeting the basic requirements of the directive.Size of CE markSize of CE markCE mark, trade name, trademark, European agent and importer's address must be pasted or printed on the toy body or other packaging in an obvious and easy to read style,If the toy is too small or composed of small parts, relevant information can be printed on the toy package or catalogue.The European market has packaging regulations on the size of CE mark, in which the height of CE word shall be at least 5mm, and the total length of CE word shall not exceed 12mm. The width of CE font,It shall not be less than 1 / 5. The thickness should be at least 1 / 5 of the height (at least 20 in this case × 1 / 5 = 4mm) as shown in the figure, the peripheral radius is 10mm, and the inner transverse column must have at least 80% (10%) of the peripheral radius × 0.8=8mm)The figure shows an example of CE marking with a height of 2 cm. The contents of the marking should include warnings and precautions printed in local market words. Name of manufacturer or authorized agent, importerTrademark and address. CE in compliance with regulations.
Project introduction: 'CE' mark is a compulsory safety certification mark.
Application description: Certification application process: consultation → application → contract signing → technical support (optional) → inspection preparation → inspection submission → repeated test → certificate issuance.
Expected cycle: 5-7 working days
Latest offers:
  CE certification
  • Project description
  • Customer case
  • Certification application

CE认证



1. Introduction to CE certification


'CE' mark is a safety certification mark, which is regarded as the passport opened by the manufacturer and entered the European market. CE stands for the logo of European unified CE certification (conform Europeenne). All products with 'CE' mark can be sold in EU member states without meeting the requirements of each member state, so as to realize the free circulation of goods within EU Member States.

   

        CE认证简介


In the EU market, 'CE' mark is a compulsory certification mark. Whether products produced by enterprises within the EU or products produced by other countries, if they want to circulate freely in the EU market, they must be affixed with 'CE' mark to show that the products meet the basic requirements of the EU Directive on new methods of technical coordination and standardization. This is a mandatory requirement for products under EU law.








2. Which certification bodies are there for CE certification? CE certification body recommended!


CE certification body recommends Beide technology!!!

The full name of Bede technology is: Shenzhen Bede Technology Testing Co., Ltd., which was established in Shenzhen Special Economic Zone in July 2006. In 15 years, it has been ZTE, Feike and Han laser,

Thousands of women's mobile phone testing stations, such as Raymond lighting, etc

At present, the company has a business site of more than 2500 square meters, including more than 1000 square meters of Technology Center laboratory and sample room, and more than 800 square meters of business department and customer service department of marketing center,

The meeting room, reception area, reception room, manager's room and finance room of the management center cover an area of 7

00 square meters;

The company has all kinds of talents, all inspectors work with certificates, have the qualification of import and export commodity inspection and quarantine, and have rich experience in testing and product evaluation
Provide customers with one-stop global certification solutions. The experiment has advanced testing equipment
More than 200 sets are prepared, all purchased from international brands such as Tektronix, Agilent and German R / s, and put into use after being calibrated by national recognized measurement institutions. The company's testing laboratory is in

Under the guidance of UL, Siemens, Rheinland and other authoritative certification bodies in the United States, according to

Established according to ISO 17025 laboratory management system, it can provide customers with fair and satisfactory test data and provide customers with comprehensive and comprehensive one-stop service.



3. Which products need CE certification and the benefits of CE certification


All products exported to the EU market need CE certification. The difference lies in different directives, such as MD for mechanical products and EMC LVD for electronic products,

Wireless products are red, general products are RoHS, and special products have special requirements and instructions. Therefore, for CE certification, it is recommended to consult professional machines

It will greatly save your company's CE certification time, energy and expenses if you entrust professional people to do professional things.


Applying for CE certification has many advantages: 1 The EU's laws, regulations and harmonized standards are not only numerous, but also complex in content, so they have won the support of the EU

The designated agency is a wise move that saves time, labor and reduces risks; 2. To maximize access to information from consumers and market surveillance agencies

Letter; 3. It can effectively prevent the occurrence of irresponsible accusations. Because the situation of each product is different, it is recommended to consult a professional organization to compete

Get more preferential policies and benefits!


4. How to apply for CE certification? Detailed process introduction


The way and process of handling CE certification for different products are the same. The detailed process is as follows:

1. The manufacturer's relevant laboratory (hereinafter referred to as the laboratory) makes an oral or written preliminary application.
2. The applicant fills in the CE marking application form and sends the application form, product instructions and technical documents to the laboratory (if necessary, the applicant company is also required to provide a prototype).
3. The laboratory shall determine the inspection standards and inspection items and quote.
4. The applicant confirms the quotation and sends the samples and relevant technical documents to the laboratory.
5. The applicant shall provide technical documents.
6. The laboratory sends a charge notice to the applicant, and the applicant pays the certification fee according to the charge notice.
7. The Laboratory conducts product testing and reviews technical documents.
8. Review of technical documents includes: A. whether the documents are perfect. B whether the document is written in the official language of the European Community (English, German or French).
9. If the technical documents are incomplete or do not use the specified language, the laboratory will notify the applicant for improvement.
10. If the test fails, the laboratory will notify the applicant in time and allow the applicant to improve the product. In this way, until the test is qualified. The applicant shall respond to the technology in the original application
Change the data to reflect the actual situation after the change.



5. What materials need to be prepared for CE certification? The details are as follows:


a. Product instructions.
b. Safety design documents (including key structure drawings, i.e. design drawings that can reflect the climbing distance, gap, number of insulation layers and thickness).
c. Product technical conditions (or enterprise standards),
d. Product electrical schematic diagram. e. Product circuit diagram. f. List of key components or raw materials (please select products with European certification mark).
g. Copy of certification of complete machine or component. h. Other required information.

Special note
1. In order to shorten the certification cycle, the data provided should preferably be in the form of electronic documents.
2. In the process of certification, for some special circumstances, the enterprise may need to submit other additional relevant materials.



6. How much does CE certification cost? How long will it take?


Cost ---- because CE certification belongs to product certification, the corresponding testing requirements, testing costs and testing cycles of different products are also completely different. At the same time

Different licensing requirements will also affect the cost. Therefore, if you want to know the clear CE certification fee, it is better to integrate it according to the specific products and specific requirements provided by your company

Evaluation is the only way to provide specific quotation!

Cycle - 'it generally takes 15-20 working days to apply for CE certification. For general products, if your company's products are dangerous machinery products, medical devices, etc

It's a product with complex structure. The application time is longer. The details need to be determined after the comprehensive judgment of the engineer!


7. Acceptance object and size of CE certification mark


The acceptance object of CE certification mark is the national regulatory authority responsible for implementing market product safety control in EC member states, rather than customers. When a product has been attached with CE certification mark,

The authorities responsible for sales Safety Supervision in Member States shall assume that they meet the main requirements of the directive and can circulate freely in the community market.

The free circulation of goods is the cornerstone of establishing a single market. The mechanism to realize the free circulation of goods is the CE mark. This mechanism is established between EU countries to avoid new trade

Barriers, mutual recognition and coordination of technical standards. The principles are as follows:

The contents stipulated in the harmonized legal documents of CE certification (i.e. EU directives) are limited to the basic requirements of products, so as to facilitate the free circulation of products within the EU;

The EU harmonized standards contain the basic requirements of the directive;

The application of EU harmonized standards and other standards is voluntary. Products can choose to apply EU harmonized standards or other technical specifications to meet the basic requirements specified in the directive

requirement; Products that meet the EU harmonized standards are certainly recognized as meeting the basic requirements of the directive.

Size of CE mark


Size of CE mark

CE mark, trade name, trademark, European agent and importer's address must be pasted or printed on the toy body or other packaging in an obvious and easy to read style,


CE认证简介

If the toy is too small or composed of small parts, relevant information can be printed on the toy package or catalogue.

The European market has packaging regulations on the size of CE mark, in which the height of CE word shall be at least 5mm, and the total length of CE word shall not exceed 12mm. The width of CE font,

It shall not be less than 1 / 5. The thickness should be at least 1 / 5 of the height (at least 20 in this case × 1 / 5 = 4mm) as shown in the figure, the peripheral radius is 10mm, and the inner transverse column must have at least 80% (10%) of the peripheral radius × 0.8=8mm)

The figure shows an example of CE marking with a height of 2 cm. The contents of the marking should include warnings and precautions printed in local market words. Name of manufacturer or authorized agent, importer

Trademark and address. CE in compliance with regulations.


 CE认证

Materials required for CE certification
1. Product instructions.
2. Safety design documents (including key structural drawings, i.e. design drawings that can reflect the climbing distance, gap, number and thickness of insulation layers).
3. Product technical conditions (or enterprise standards).
4. Product electrical schematic diagram.
5. Product circuit diagram.
6. List of key components or raw materials (please select products with European certification mark).
7. Copy of certification of complete machine or component.
8. Other required information.

Remarks
1. In order to shorten the certification cycle, the data provided should preferably be in the form of electronic documents.
2. In the process of certification, for some special circumstances, the enterprise may need to submit other additional relevant materials.


Certification application form: Beide certification application form (general) v10 0.doc





Hot Products / Popular search: More
2018 - 02 - 28
1. Introduction to CE certification'CE' mark is a safety certification mark, which is regarded as the passport opened by the manufacturer and entered the European market. CE stands for the logo of European unified CE certification (conform Europeenne). All products with 'CE' mark can be sold in EU member states without meeting the requirements of each member state, so as to realize...
2018 - 01 - 30
European unionCE certification, EU ERP certification, EU REACH certification, EU ROHS certification, EU ENEC certificationGermanyTUV South Germany related certification, Germany WEEE certification, Germany GS certificationBritainUK BSI certification UK ukca certificationFranceFrench NF certificationFour Nordic countriesNordic certificationNetherlandsKema certification in the NetherlandsAustriaAust...
2017 - 06 - 09
Certification Content SummaryASTM was formerly known as the International Association for Testing Materials (IATM).In the 1880s, in order to resolve the opinions and differences between buyers and suppliers in the process of purchasing and selling industrial materials, it was proposed to establish a technical committee system, and the technical committee would organize representatives from all asp...
2017 - 06 - 09
Introduction to IEC CertificationThe IEC standard is the International Electrical Commission (International Electrical Commission), which is a worldwide organization for standardization composed of electrotechnical commissions of various countries. Its purpose is to promote the standardization of the world's electrical and electronic fields. The origin of the International Electrotechnical Com...
  • About Beide
    • Company profile
    • Corporate culture
    • Service area
    • Development path
    • Laboratory overview
    • Talent recruitment
  • Beide Services
    • Global certification
    • Testing service
    • System service
    • EU authorized agent
    • Registration service
    • Metrological calibration
    • Factory audit service
  • News Information
    • Company news
    • Industry news
    • Employee activities
  • Resource center
    • Publicity album
    • Certification body
    • Certificate template
  • Certificate query
    • Certificate query
    • Application form download
    • Case progress
    • Third party certificate check
  • Contact us
    • Contact information
    • Online message
CONTACT US
WeChat
Official Account
Free consultation hotline
400-6288-211
Address: 6 / F, building e, hourui third industrial zone, Xixiang, Bao'an District, Shenzhen
Copyright ©2022 - 2025 Shenzhen Beide Technology Testing Co., Ltd
犀牛云提供云计算服务
var _kc_userID="169296";