深圳市贝德技术检测有限公司
NEWS Industry News
News News

Medical Device CE Certification | MDD Directive

Release time: 2018-02-05
Views: 358
Announcer:


To successfully pass CE certification for medical device products, three aspects of work need to be done well.


Firstly, collect EU technical regulations and EU (EN) standards related to certified products, and digest, absorb, and incorporate them into enterprise product standards.


Secondly, the enterprise strictly organizes production in accordance with the above product standards, which means implementing the requirements of the technical regulations and EN standards into the entire process of product design, development, and production manufacturing.


Thirdly, enterprises must establish and maintain a quality system in accordance with ISO9000+ISO13485 standards, and obtain ISO9000+ISO13485 certification.


EU technical regulations and EN standards to be followed for CE certification of medical devices


For the 18 categories of industrial product directives currently issued by the European Union, based on their structure, they can be divided into vertical and horizontal directives. Vertical directives are targeted at specific products, such as medical device directives; The horizontal directive is applicable to various product families, such as the electromagnetic compatibility directive, which applies to all electrical and electronic component products.


For medical devices, the applicable directives include items 14, 1, and 5, namely the 93/42/EEC Medical Device Directive, 73/23/EEC Low Voltage (LVD) Directive 89/336/EEC Electromagnetic Compatibility (EMC) Directive.


The EU standards that support these directives are:


(1) EN60601-1 Medical Electrical Equipment Part 1: General Safety Requirements;


(2) EN60601-1-1 Medical Electrical Equipment Part 1: General Safety Requirements and First Amendment;


(3) EN60601-2-11 Medical Electrical Equipment Part 2: γ Special requirements for the safety of beam therapy equipment;


(4) EN60601-1-2 Medical Electrical Equipment Part 1: General Safety Requirements Section 1.2 Parallel Standard Electromagnetic Compatibility - Requirements and Testing. The standards (1), (2), and (3) are the basis for Gamma Knife Low Voltage (LVD) testing, while the standards (4) are the basis for Gamma Knife Electromagnetic Compatibility (EMC) testing.


Medical Device CE Certification Procedure and Content


The European Union divides medical device products into four categories, namely Class I, Class IIa, Class IIb, and Class III. Class I products need to be labeled with the CE mark and can be self declared. That is, the manufacturer prepares technical documentation files for the product, and at the same time tests the product according to relevant EN standards or entrusts a capable laboratory to test and pass the test. If Class IIa, IIb, and III products need to be labeled with the CE mark, they must be verified by a verification agency designated by the European Union. The EU also stipulates that the prerequisite for obtaining CE certification for these types of products is that the manufacturing plant must be able to pass the ISO9000+ISO13485 quality system certification, obtain the ISO9000+ISO13485 quality system certification, and the issuing unit of the certificate should be a certification body recognized by the EU. ISO9000+ISO13485 quality system certification and CE certification can be carried out simultaneously, but the CE certificate must be issued after passing the ISO9000+ISO13485 quality system certification.


According to the EU medical device CE certification procedures and contents, the following are:


1) The enterprise submits a certification application to the certification agency and fills out a certification inquiry form to submit to the certification agency;


2) The certification agency shall submit a quotation to the enterprise applying for certification, and the enterprise shall sign and confirm to complete the contract;


3) Enterprises shall submit ISO9000+ISO13485 quality system documents, namely quality manuals and procedural documents, to the certification body for system document review; Before the quality system audit, the enterprise should have at least three months of quality system operation records and complete 1-2 internal quality system audits.


4) The certification agency shall issue a certification product testing notice to a laboratory recognized by the certification agency, which will conduct low voltage (LVD) testing and electromagnetic compatibility (EMC) testing on the products applying for certification. If there are any nonconformities during the test, the enterprise shall replace them and retest them until they pass the test. After the test is completed, the laboratory will issue a test report.


5) The enterprise prepares a technical document archive (referred to as TCF file) for applying for certification of products. The above test report is also included as one of the contents of the TCF file. The TCF document is an important document submitted by manufacturers applying for CE certification to the CE certification body, and it is an important basis for the certification body to review and issue certificates. All TCF documents must be prepared in English. The TCF file includes seven aspects: ① Introduction: ② Product specification description; ③ The main file content of the design; ④ Risk analysis and assessment; ⑤ Test reports and clinical diagnostic materials; ⑥ Control of document design; ⑦ Declaration of product application.


6) The certification agency conducts a preliminary review of the enterprise's ISO9000+ISO13485 quality system and TCF documents. After the initial review, the certification body will point out the problems in the quality system and TCF documents, and enterprises should improve the quality system and TCF documents accordingly.


7) The certification agency conducts a formal review of the enterprise's ISO9000+ISO13485 quality system and TCF documents.


8) After the formal review is passed, the certification body will sign a framework agreement with the enterprise, clarifying the principles that all parties should follow after obtaining the CE certificate, the scope of product use of the CE mark, and the handling methods for complaints. Then issue ISO9000+ISO13485 quality system certification certificate and CE mark certificate.



More information:Learn more about MDD information

Related Recommend
    Release time: 2022 - 04 - 01
    In order to enhance the corporate image and facilitate customer inquiries about certificate information, Shenzhen Beide Technology Testing Co., Ltd. officially launched the new version of the certificate from April 11, 2022.Features of the new certificate:More concise - optimizing style and text layout, including reducing font size and narrowing the recognition area on the left, enhancing aesthetics;Professional image - The recognition of the words 'certificate' in multilingual characters conforms to international usage habits; Including English, Russian, French, Italian, Chinese, Arabic, and Korean;Convenient query - The CLIENT ID and CERTIFICATE NUMBER are displayed in the upper left corner of the certificate, making it easy for customers to check the authenticity;After the new v...
    Release time: 2019 - 01 - 24
    There are always things with a sense of ritual reminding us:A new year is coming soon2019 Annual Meeting of Shenzhen Beide Technology Testing Co., LtdSuccessfully concluded on the evening of January 17, 2019Next, the editor will take you to the annual meeting siteTake your own small bench and sit in a rowA visual and auditory feast is presented perfectly!On site of the annual meeting Opening remarksA new year, a new journey;New blessings, new expectations;After the enthusiastic opening remarks of the two hosts,Opening the prelude to this annual meeting.Firstly, General Manager Wang delivered a speech on stage, reviewing the achievements made in 2018; Affirm the hard work and unremitting efforts of colleagues over the past year, and express gratitude! For the new challenges of the new year,...
    Release time: 2018 - 10 - 26
    Since November 2017, there have been continuous feedback from Amazon sellers that their products have been taken off the shelves on Amazon Germany due to the lack of a German WEEE registration code and their sales have been suspended. So what is WEEE, how to register WEEE in Germany, and which products require mandatory registration? This article will explain one by one for you!1、 What is WEEE? WEEE, abbreviated as Waste Electrical and Electronic Equipment Directive, is an EU directive in Chinese. The current directive number 2012/19/EU came into effect on August 13, 2012. According to the directive, each member state of the European Union is responsible for the recycling and management of waste electronic and electrical equipment in each country.2、 About WEEE registration in Germany?...
    Release time: 2018 - 09 - 07
    Do you thinkWhat is the lowest level of human demand for WiFi?Too young!The lowest level of human demand is battery power!Currently, products such as mobile phones use lithium batteriesLithium battery as a lifesaver for mobile phonesYou need to know something elseFlammable and explosiveIn terms of safety, lithium-ion batteries have long been criticized. Especially the explosion accident of Samsung mobile phones pushed lithium-ion batteries to the forefront of the situation.Because lithium is a metal that is particularly prone to chemical reactions, it is prone to elongation and combustion. Improper handling of lithium battery packaging and transportation can lead to combustion and explosion, and accidents can also occur from time to time. The accidents caused by non-standard behavior in pa...
    Release time: 2018 - 08 - 20
    People walk in the air, scenery is at their feetExploring Shaoguan - Baide Shaoguan Two Day Tour ★ 'Tour' thrills and stimulates the first glass bridge in Shaoguan, Guangdong Province★ 'Drifting' Beijing Pearl River First Drifting Baizhang Cliff Drifting★ 'View' One of the Eight Scenic Spots of Yunmen Mountain in Shaoguan, formerly known as Ruyuan - Xiuding QiyunHere comes the reward for achieving the July motivation goal that I have in mind~Exceeding the incentive target in July, elite babiesFinally, we can gather enough mahjong for the 'Five Table'You got up early on July 18thThe journey starting at 8:10 amYou guys wake up at 6:30Still blowing my hair in the dormitory at 7:30I really have a lot of longing for this tripDay 1 of the itineraryYou went rafting...
    Release time: 2018 - 04 - 28
    On April 22, the 2018 China Green Company Annual Meeting was held in Tianjin. Mr. Wang, Vice President of Beide, and over a thousand innovative entrepreneurs, including Jack Ma, Wei Hua Ma, Liu Chuanzhi, Yonghao Liu, and Guangchang Guo, discussed the high-quality development in the era of intelligent commerce and sought the value foundation for creating new momentum. Here we embark on a brainstorming session in the era of intelligent commerce, jointly exploring the paths and methods to achieve high-quality development of enterprises.The picture shows Jack Ma's speech at the 2018 China Green Company Annual MeetingJack Ma, Chairman of the China Entrepreneur Club and Chairman of the Alibaba Group's Board of Directors, attended and delivered a speech, summarizing the 'new three per...
    Release time: 2018 - 05 - 17
    The lights of a thousand families gather together2018.1.26Auspicious Dog Welcoming Spring, Auspicious TimeBede's colleagues gather togetherStage an annual attention grabbing eventLast Friday, Bede colleagues gathered together happily to bid farewell to the year of 2017, full of memories and reluctance, with laughter and cheers, and to greet 2018 with a high attitude full of hope and challenges!Mr. Wang, CEO of Beide Group, Mr. Tian, CFO, and Mr. Zhang, COO, personally delivered speeches at the 2017 Beide Annual Meeting, cheering on! The leaders reviewed and summarized their work in 2017, and sincerely thanked every Bede colleague for their hard work. At the same time, they firmly believe that in 2018, they can help Bede achieve more brilliant development and jointly create a better Bed...
    Release time: 2017 - 06 - 09
    For products such as UV vacuum cleaners, UV lamps, and ozone disinfectors, many foreign buyers have begun to require manufacturers to conduct sterilization and mite killing tests on these products to verify whether their performance meets the relevant requirements Beide Company is currently able to detect over 20 bacterial strains, such as Escherichia coli, Salmonella, P.aeruginosa, Staphylococcus, and so on.Effect diagram of killing mites Sterilization effect diagram
    Release time: 2017 - 06 - 09
    After about 6 months of preparation, Beide Company officially began to undertake ultraviolet (UV) aging testing on August 15, 2011. The main testing standards used are ISO 4829.3, ASTM B117-2, and other standards. After testing according to the aging time required by the customer, various performance indicators of the product, including color difference comparison, can be evaluated. At present, the main products tested are various building materials for outdoor use, water pipes, automotive plastic components, and so on.
    Release time: 2017 - 09 - 23
    My childhood dream was to fly to the other side of the worldI only realize when I grow up that the world is a circleNo matter how far we goNo matter how high we flyAs long as you look up, you can see the same bright moonAs long as you turn around, you can find the origin of your departureHeart together, home is here!The Mid Autumn Festival of 2017 is approachingWishing employees a happy Mid Autumn Festival of reunion and celebrationEmbodying the company's corporate culture concept of caring for employeesThe company has specially purchased Mid Autumn Festival mooncakes for all employees.The picture shows the general manager personally present to distribute mooncakes to employeesMid Autumn Festival family photoThis year's Mid Autumn Festival brings family members and celebrates toget...
    Release time: 2021 - 11 - 17
    The GC logo certification certificate serves as an entry certificate for products entering the markets of the seven Gulf countries (Saudi Arabia, United Arab Emirates, Kuwait, Qatar, Bahrain, Oman, Yemen), and its certification adopts the latest versions of GSO/IEC/EN and other standards. When the standard version is updated, the transition period for the old version of the standard is 2 years. After the transition period ends, the GC logo certification will force the adoption of the latest version of the standard. After the release of the new standard, certificates obtained based on the old version must be updated before the mandatory implementation date of the new standard, otherwise the certificate will be suspended or revoked. The following table shows the release time and mandatory im...
    Release time: 2021 - 11 - 16
    Yes, you're not mistaken. We've been rewarded again!!This time it's Hilton Hotel, a five-star self-service service with endless meals. The protagonist of this event is in October 2021. After unremitting efforts, they have achieved great results and are among the top five. They are the ones who spread flowers and flowers. Such an important moment, we must share it with everyone!After work, the boss drove himself and accompanied him all the way to a large hotel with a variety of dishes and elegant and comfortable environment. Here, hairy crabs, scallops, Roche shrimp, sashimi, small hot pot, Roasted whole lamb, and all kinds of desserts can be said to be a paradise of seafood, and the ceiling of desserts~Look at everyone's happy expression, it's really a reflection from t...
    Release time: 2021 - 11 - 11
    In Bede, excellent you will be discovered!For Bede colleagues, a certificate of commendation is not just a paper stamp with a name written on it. It represents the glory of nothingness, it is a high recognition of your work by colleagues, and it is also a witness to your hard work!Time flies, and in the blink of an eye, the award ceremony has been in full swing for over two years since its launch, and the results are very good! Next, let's introduce how it works~We commend employees on a monthly basis. At the end of each month, they are recommended by department leaders and voted by all staff to fairly and fairly select the best employees of the month. Awards are also set from multiple dimensions and encompass more comprehensive directions. To be quiet, excellent employees will not onl...
    Release time: 2021 - 11 - 09
    Recently, multiple batches of goods exported to the United States have encountered the problem of 'difficulty in entering customs'. US customs have seized some of the goods and required enterprises to conduct TSCA response before customs clearance. According to TSCA regulations and US customs requirements, a TSCA compliance or exemption declaration must be provided with the relevant goods upon entry. If the enterprise violates this regulation, it may face consequences such as prohibition of entry, detention of goods, detention fees, fines, and import blacklist. Below, Bede Testing will briefly introduce TSCA certification for you.On January 6, 2021, the United States Environmental Protection Agency (US EPA) published rules 40 CFR 751.401-751.413 for five persistent, bioaccumulative...
    Release time: 2018 - 08 - 30
    It's finally FridayI won't be working tomorrow Saturday(The editor silently rustled)   But……  Dedicated and dedicated to my jobEven if you're ecstatic and uncertain, stick to tweetingPatiently read the entire articleRecently, the European Union and the United States have implemented recalls of multiple toysRecall toys: plastic dollsRecall release country: EUReason for recall: Phthalates contained in plastic materials may be harmful to children's health and may cause harm to the reproductive system; At the same time, children may put them in their mouths and swallow them, causing suffocation or damage to their gastrointestinal tract. The European Union has recently implemented a recall of six plastic dolls produced in China.Recall toys: wooden toysRecall ...
CONTACT US
WeChat
Official Account
Free consultation hotline
400-6288-211
Address: 6 / F, building e, hourui third industrial zone, Xixiang, Bao'an District, Shenzhen
Copyright ©2022 - 2025 Shenzhen Beide Technology Testing Co., Ltd
Rhino Cloud provides cloud computing services
var _kc_userID="169296";